Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to follow
the safety warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the sa-
fety warnings and the instructions for future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Risk of electric shock.
Protection class III.
IP20
Protection class IP20.
The light produced by this flash light is
extremely bright.
Do not look directly into the light. This may
momentarily impair your vision.
Do not continue working if your vision is
affected.
Do not cover the lens while operating the
flash light. This may cause the flash light to
overheat.
Do not use in rain.
Indoor use only.
The LEDs are not replaceable.
Do not dispose of the product in unsuitable
containers.
The product is in accordance with the
applicable safety standards in the European
directives.
4
SAFETY WARNINGS FOR WORK LIGHT
a) Please read and observe all safety warnings and
instructions enclosed with the battery or the
power tool with which the battery was provided.
b) Do not work with the cordless worklight in
hazardous areas.
c) After the automatic shut-off of the cordless
worklight, do not continue to press the On/Off
button. The battery could become damaged.
d) Do not direct the light beam at persons or
animals and do not stare into the light beam
yourself (not even from a distance).
e) Do not cover off the lamp head while operating
the cordless worklight. The lamp head heats up
during operation and can cause burns when the
heat accumulates.
f) Do not use the cordless worklight in road traffic.
The cordless worklight is not approved for
illumination in road traffic.
g) Before any work on the cordless worklight
itself (e.g. assembling, maintenance, etc.), as
well as when transporting and storing, remove
the battery from the cordless worklight.
h) Do not allow children to use the cordless
worklight. It is intended for professional use.
Children can unintentionally blind themselves or
other persons.
2. MACHINE INFORMATION
Intended use
The work light is intended for mobile illumination
in limited space and for limited time in dry indoor
areas and is not suitable for general room lighting.
TECHNICAL SPECIFICATIONS
Model No.
Voltage
Power input
Head positions
Pivoting angle
Weight
Only use the following batteries of the VONROC PO-
WER 20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CD801AA
20V, 2Ah Lithium-Ion
CD803AA
20V, 4Ah Lithium-Ion
WL501DC
20V
Max. 1.5W
6
128º
0.11kg
WWW.VONROC.COM
Advertenties
Inhoudsopgave
