Advertenties
Beschikbare talen
Beschikbare talen
CHARGING THE POWER REBEL 26K
(01) Via adapter or computer USB
Connect a 5V2A power adapter (not included) or a USB cable from
your computer to the Micro USB or USB-C port of the Power Rebel
26K to start charging. Full charging time is 7 to 20 hours (and
depends on charge current of adapter or computer USB).
(02) Via solar panel
Place the Power Rebel 26K solar panel in the direction of sunlight.
Charging will start automatically and the green power indicator
LED will come on. Full charging time is a minimum of 60 hours
and depends on sun conditions. The charge status is shown via
the 4 blue power indicator LED's (lashing means charging, 4 solid
LED's means fully charged).
POWER-BUTTON
(01) Power indicator
Shortly pressing the power button shows the charge status of
the Power Rebel 26K via the 4 blue power indicator LED's and
activates the Power Rebel 26K.
(02) LED (emergency) light
Holding the power button for a few seconds activates the LED
light. By shortly pressing the power button you can switch through
the diferent lighting modes: high, low, SOS and warning. You
turn of LED light by holding the power button for a few seconds.
The LED light has a capacity of 3W / 198 lumen (~ the brightness
of a 25W standard light bulb). When the Power Rebel 26K is fully
charged the LED light can work for 32 hours (high) to 64 hours
(low).
Advertenties
