Download Print deze pagina

B DUTCH STRADA Korte Handleiding pagina 2

Handdoekradiator

Advertenties

Gebruikersinformatie
Voorzorgsmaatregelen voor veilig gebruik
1. Lees en begrijp de gebruiksaanwijzing zorgvuldig voordat u dit
product gebruikt.
2. Dit product is alleen bedoeld voor het drogen van handdoeken
en andere droog gewassen textiel. Gebruik het niet voor het
verwarmen of drogen van zijden stoffen.
3. Sluit het product aan op een stroomvoorziening die overeenkomt
met de aangegeven spanning op het typeplaatje.
4. Gebruik dit product niet als het verwarmingselement of de
behuizing beschadigd is.
5. Zorg ervoor dat het product geaard is om veiligheidsrisico's te
voorkomen.
6. Koppel het product los van de stroomvoorziening voordat u
onderhoud of reiniging uitvoert.
7. Schakel de stroom volledig uit als externe bedrading gerepareerd
moet worden.
8. Gebruikers zonder ervaring in elektrische veiligheid moeten het
product gebruiken onder toezicht van een professional.
9. Om verwondingen bij jonge kinderen te voorkomen, installeer de
laagste verwarmingsbeugel minimaal 600mm boven de grond.
10. Installeer of gebruik het product zo ver mogelijk van
doucheruimtes, badkuipen of gebieden die gemakkelijk nat kunnen
worden.
11. Als het netsnoer beschadigd is, laat het dan repareren door de
fabrikant of gekwalificeerde elektriciens.
12. Dit apparaat is alleen ontworpen voor gebruik binnenshuis.
13. Houd plastic zakken buiten het bereik van kinderen.
Reinigen elektrische handdoekradiator
1. Trek de stekker uit het stopcontact en laat de elektrische
handdoekradiator afkoelen voordat u begint met schoonmaken.
2. Dompel de droger/elektrische handdoekradiator, het netsnoer of
de stekker niet in water.
3. Zorg ervoor dat de elektrische bedrading droog is.
4. Veeg de elektrische handdoekradiator af met een vochtige doek en
droog hem vervolgens met een zachte doek.
5. Gebruik geen staalwol of andere schurende schoonmaakmaterialen
om de handdoekverwarming schoon te maken om schade aan het
oppervlak te voorkomen.
Installatie-instructies
1. Snijd de groefdiepte, breedte en hoogte op de installatielocatie uit
zoals aangegeven in de afbeelding (800 x 1220 x 20 mm).
2. Lijn de ingebedde onderdelen uit, markeer de vier
bevestigingsgaten en boor ze met een slagboor. Plaats pluggen
in de gaten, bevestig de ingebedde bodemplaat met zelftappende
schroeven en stel de horizontale positie af.
3. Zorg ervoor dat de stroom is uitgeschakeld en verbind
de aardedraad, nuldraad en fasedraad van de ingebedde
voedingskabel correct met de stroomvoorziening.
A. Neem de installatiepilaren uit de verpakking en plaats ze in de
decoratieve onderkap.
B. Verwijder het schroevenpakket, installeer de 5 bouten in
de installatiebasis, vergrendel de installatiekolom en stel de
horizontale balk horizontaal af.
C. Lijn de bedradingsklemmen onder de basis uit met de sleuven van
de bedradingsklemmen op de installatiekolom, plaats ze en draai
de afdekkap vast. Opmerking: Zorg voor een correcte aansluiting
om kortsluiting en beschadiging van de verwarming te voorkomen.
D. Druk de decoratieve afdekking op het tegeloppervlak en plaats
deze horizontaal.
Opening wall width 12cm
Wall cpening depth
2cm
Concealed
Wall
bottom plate
Installation
base
Under the
base
Terminal
blocks
Blue zero line
Dual color ground wire
Brown fire wire
Concealed bottom plate
Installation base
Decorative bottom cover
O ring
Butt terminal
S et screw
Touch screen switch
User Information
Precautions for Safe Use
1. Carefully read and understand the instructions before using this
product.
2. This product is only intended for drying towels and other dry-
washed textile fabrics. Do not use it for heating or drying silk
Installation base
fabrics.
reserved
3. Connect the product to a power supply that matches the rated
ceramic tile
surface 3cm
voltage displayed on the electrical nameplate.
4. Do not use this product if the heating element or shell is damaged.
5. Ensure the product is grounded to avoid safety hazards.
6. Disconnect the product from the power supply before maintenance
or cleaning.
7. Completely cut off the power supply if external wiring devices need
to be repaired.
8. Users without electrical safety experience should operate the
product under the supervision of a professional.
9. To avoid harm to young children, install the lowest heating bracket
at least 600mm above the ground.
10. Install or use the product away from shower rooms, bathtubs, or
areas prone to water splashes.
11. If the power cord is damaged, have it repaired by the manufacturer
or qualified electricians.
Tile opening
3.6-4.5cm
12. This device is designed for indoor use only.
13. Keep plastic bags away from children.
Cleaning Electric Towel Rail
1. Unplug the power plug and let the electric towel rail cool down
before cleaning.
2. Do not immerse the dryer/electric towel rail, power cord, or power
plug in water.
3. Ensure the electrical wiring is dry.
4. Wipe the electric towel warmer with a damp cloth, then dry it with a
soft cloth.
5. Do not use steel wool or other abrasive cleaning materials to clean
the towel warmer to avoid surface damage.
Installation Instructions
1. Cut out the groove depth, width, and height at the installation site
as shown in the figure (800 x 1220 x 20 mm).
2. Align the embedded parts, mark the four fixing holes, and drill
them using an impact drill. Insert wall plugs into the holes, secure
the embedded bottom plate with self-tapping screws, and adjust
the horizontal position.
3. Ensure the power is cut off and correctly connect the ground wire,
neutral wire, and live wire of the embedded power cord to the
power supply.
A. Take the installation pillars from the packaging and insert them
into the decorative bottom cover.
B. Remove the screw pack, install the 5 bolts into the installation
base, lock the installation column, and adjust the horizontal bar to
the horizontal position.
C. Align the wiring terminals under the base with the slots of the
wiring terminals on the installation column, insert them, and
tighten the cover cap. Note: Ensure proper connection to avoid
short circuits and damage to the heater.
D. Press the decorative cover onto the tile surface and place it
horizontally.

Advertenties

loading