Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Pan detection
The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot
and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Booster function
The booster function [ B ] and the Double Booster [
heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like nuddles cooking.
•
Start up / Stop the booster function:
Action
Zone selection
Start up the booster
Stop the booster
•
Start up / Stop the double booster function:
Action
Selection of the zone
Start up Booster
Start up Double Booster
Stop the Double Booster
Stop Booster
•
Power management:
The hole cooking hob is equipped by a maximum of power. When the booster function is activated,
and not to exceed the maximum power, the electronic system orders to reduce automatically the
power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds and then
shows the maximum of power allowed :
Heating zone selected
[ P ] is displayed
Control panel
press key [ 0 ] from the zone
press key [ B ]
slide on the "SLIDER"
or press on [ B ]
Control panel
Press key [ 0 ]
Press key [ B ]
Re-press key [ B ]
Press key [ B ]
Slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
30
] grants a boost of power to the selected
Display Zone
[ 0 ] and control light on
[ P ]
[ P ] to [ 0 ]
[ 9 ]
Display
[ 0 ]
[ P ]
[
[ P ]
[ 9 ] to [ 0 ]
(example: power level 9)
and P ]
Advertenties
Hoofdstukken
Inhoudsopgave
