Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DMX settings:
DMX channel Function
0 - 49: No light
50 - 99: DMX manual mode
CH 1
100 - 199: Soundcontrol
200 - 255: Automatic
Pattern selection,
CH 2
all the patters change with the audio
When dipswitches 9 + 10 are set to "on" the unit works in auto mode.
When dipswitch 10 is set to "on" the unit works in sound-activation mode.
When dipswitch 10 is set to "off" the unit works in DMX or slave mode.
Just one light can be settled as master.
A DMX signal terminator is recommended to avoid a bad signal caused by other
electrical devices. A DMX terminator is a XLR connector with a 120Ω resistor between
pin 2 and pin 3 of the XLR connector. Connect it to the last OUTPUT socket of the final
light. See picture:
IN
OUT
Technical specifications:
1. Power supply: AC 220 – 240V, 50Hz
2. Rated power: 50W
3. Working modes: Sound activation/Auto-play/DMX512/Master-slave
4. Control signal: DMX512
5. DMX channels: 2
6. Operating temperature: -1° - 35°
7. Storage temperature: -10° - 60°
8. Warm up time: <15min
IN
OUT
IN
OUT
Advertenties
Inhoudsopgave
