Download Print deze pagina

CHAMELEON VisuWall Montagehandleiding pagina 3

Advertenties

Beschikbare talen

Beschikbare talen

Congratulations with your purchase!
Chameleon magnetic mounting system
Chameleon whiteboards are mounted using strong magnetic plates which are screwed to the wall. This has several
advantages:
TÜV-certified magnetic mounting system.
Simple and precise assembly: panels are easy to adjust and align to each other.
Invisible mounting system: panels hang flush to the wall with a minimum gap.
Dismountable system so you can take the product with you.
When mounting your Chameleon product, keep the following things in mind.
The wall on which the boards are mounted must be suitable to provide sufficient security via the
right plugs and screws. The supplied screws and plugs are suitable for stone walls. In the case of a
different type of wall, make sure you have matching mounting material. Make sure that the screw
head can be deep enough in the mounting plate, without protruding. This is due to the magnetic
load-bearing capacity.
The wall must be smooth (no bumps or dents) and free of obstacles.
Magnetic surface of the plate should be completly in contact with back of the board to have it's
full holding power. Always mount magnets in the same flat plane.
With bumpy walls use spacers (available in most D.I.Y. shops) to put the magnets in the same
plane. See image 1.
Check flatness between plates by using a level. Adjust with spacers and repeat check until all
surface are in the same plane. See image 2.
Tip: the use of glass vacuum lifters makes assembly much easier. These are available at
Spacer
Chameleon (article number 51508.010) or at a hardware store.
Note: do not place more than 1 kg. of accessories per m2 of whiteboard. This is to prevent the
whiteboard from shifting.
X
TÜV Nederland QA
Image 1
- Top view -
Image 2
4
Placement magnetic plates
Fix the magnetic plates (300x300 mm) to the wall as indicated in the drawings.
Tip: previous to mounting, mark the sides of the panels on the wall with a pencil
r.
to make the placement of the plates easie
16006.000
100 mm
980 mm
1960 mm
16006.000
100 mm
980 mm
2940 mm
16006.000
100 mm
980 mm
3920 mm
16006.000
100 mm
980 mm
4900 mm
4× Ø 6mm
4× Dübel 6mm
4× Schraube 4×40
Magnetplatte
300×300mm
5

Advertenties

loading