Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Switch
User manual
Thank you for purchasing the Lightpro Switch.
This document contains the required information for
correct, efficient and safe use of the product. Consult the
user manual of your transformer for more information
about the installation and connection of your lighting
plan or visit our website www.lightpro.nl
Read the information in this manual carefully before
using the product. Keep this manual near the product for
consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Switch is a smart switch intended for
use in combination with the Lightpro 12-Volt outdoor
lighting system. To control the Switch, a suited tablet
or smartphone is required with the (free) Lightpro
app installed. For more information about using and
downloading the app, go to www.lightpro.nl/smart.
This product may only be used in combination with the
Lightpro 12-Volt system. Any modification may have an
impact on the safety, warranty, and correct operation of
the product and/or other parts of the system.
SPECIFICATIONS SWITCH
Product
Article number
Usage (max.)
Maximum capacity (max.)
Dimensions (H x L x W)
Protection class
Input
CONTENT OF THE PACKAGING
[Figure A]
1. Switch
3. Ground spike
4. Wall mounting bracket
5. Screws
6. Plugs
7. Lightpro F-connector (art. no. 137A)
8. Lightpro M-connector (art. no. 138A)
Lightpro Switch
238A
1W
150W
230 x 68 x 33 mm
IP44
12V AC/DC
Verify whether all parts are included in the packaging.
For questions about parts, service, complaints, or other
things, you can always contact us.
Email: info@lightpro.nl.
INSTALLATION
When placing the Switch, keep the following regulations
in mind:
Attention: for the correct operation of the Switch, your
transformer must be permanently switched on.
Option 1: Wall mounting
[Figure B]
1. Fix the wall bracket to the wall with the screws
supplied.
[Figure C]
2. Place the Switch in the wall bracket.
Option 2: Ground placement
[Figure D]
1. Push the spike into the ground up to the marking.
[Figure E]
2. Place the Switch on the spike.
PAIRING SWITCH SMART
1. Click '+' at the top right of the app.
2. Click 'Add device'.
3. Choose 'Switch (Wi-Fi)'.
4. Make sure you are connected to a 2,4 GHz Wi-Fi
network.
5. Confirm whether the device is flashing.
6. The app will now connect to the Switch Smart. This can
take up to 2 minutes.
7. A notification appears as soon as the Switch Smart is
connected.
HOW TO RESET SWITCH SMART
[Figure F]
Press and hold the reset button for 5 seconds.
Advertenties
Inhoudsopgave
