Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. Press on the locking button and detach the clear canister from the body. Use a small
screwdriver to detach the ring from the body. If it is hard to detach the ring by screwdriver,
use cutting plier to cut.
2. Use Philips screwdriver to unscrew all the screws on the main body.
3. Separate the body in two halves to access the main chamber. Use a Philips screwdriver to
remove the end cover and access the battery pack.
4. Take out the battery pack from the main chamber. To detach the battery pack, press the
clip on the connector and pull it out.
Important! Wrap the connector immediately with insulating tape in order to avoid short circuit
caused by contact of both wire terminals.
25
Advertenties
Inhoudsopgave
Probleemoplossen
