Download Inhoudsopgave Inhoud Print deze pagina

Mounting The Extraction Arm On The Wall Bracket (Tmb); Mounting The Extraction Hood; Maintenance; Troubleshooting - Lincoln Electric LFA 4.1-LOWCEiLiNG 86958022 Gebruikershandleiding

Flexibele afzuigarm
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

3.2
Mounting the extraction arm on the wall
bracket (TMB)
!
The wall mounting bracket is described in the
corresponding manual.
Mount the connection flange using the four
hexagon-head bolts and the washers on the wall
brackets in such a way that the cable lead-through
hole is situated at the wall side and the long end
of the pin is pointing to the front, in line with the
cable lead-through hole. See fig. 3.04 manual:
0507270020/LFA/9907/02.
Mount the hanging adapter on the hinge rod using
the bolts and nuts.
Mount the spring bracket and position the bush
and the flexible hose around the connection
flange. See fig. 3.05 manual:
0507270020/LFA/9907/02.
Mount the arm section hood side on the arm
section wall side using the bolt and the nut.
If the extraction arm has been fitted with a WL
and/or AST, you should now fit the supply cable
(NCW 11). For this purpose lead the cable
throught the extraction arm and through the
applied tie-rip two times (arm section wall side).
For this purpose see the corresponding manual.
Establish an airtight sealing of the extraction arm.
For this purpose slide both flexible hoses over the
connection flange, hanging adapter and the middle
hinge and fit the bushes.
Mount the extraction hood. See § 3.3.
3.3

Mounting the extraction hood

Position the bush and the also supplied flexible
hose temporarily over the end of the arm section
of the extraction hood.
Mount the extraction hood using the bolt and the
nut.
If the extraction arm has been fitted with a WL
and/or AST, you should now fit the cable. Lead
the cable through the extraction arm and through
the fitted tie-rip two times (arm section wall side).
For this purpose see the corresponding manual.
Establish an airtight sealing of the extraction arm.
For this purpose slide the flexible hose over the
hood and fit the bushes. See fig.3.10 manual:
0507270020/LFA/9907/02.
4

MAINTENANCE

See user manual: 0507270020/LFA/9907/02.
5

TROUBLESHOOTING

See user manual: 0507270020/LFA/9907/02.
0507430020/LFA4.1-LC/00/01
6

ORDERING SPARE PARTS

See user manual: 0507270020/LFA/9907/02.
EN - 6

Advertenties

Inhoudsopgave
loading

Inhoudsopgave