Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connecting to a DVD Player
via HDMI
Please refer to your DVD player's instruction book
for additional information. Power off both the TV and
the device before making any connections.
Note: Not all cables shown in the illustration are
supplied.
•
If your DVD player has an
connect via HDMI for better video and audio quality.
•
When you connect to DVD player as illustrated above,
switch to the connected HDMI source. See, Input
Selection section for more information on changing
sources.
HDMI socket, you can
HDMI Cable
(not supplied)
External deeice
English - 51 -
Connecting to a DVD Player
via Component Sockets
(YPbPr) or Scart Cable
•
Some DVD players are connected through
COMPONENT SOCKETS (YPbPr). YPbPr can be
used only when you connect a device that has a
YPbPr output through the PC input with YPbPr to
PC cable (YPbPr cable is not supplied).
•
When the connection is made, switch to YPbPr
source. See, "Input selection" section.
•
To enable audio connection, use the VGA/Component
Audio cable. First, plug single jack of the cable to
the TV. Afterwards, insert your DVD player's audio
cable's connectors into the plural part of the VGA/
Component audio connection cable (see illustration
below). Colours of the connected jacks should match
( RED & WHITE).
•
When the connection is made, switch to YPbPr
source. See, Input selection section.
•
You may also connect through the SCART input.
Scart Cable
(not supplied)
External deeice
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
