Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DMX control
Connect the machine directly to a DMX controller or a DMX loop with multiple DMX effects. The machine uses a
3-pin XLR connector for DMX connection.
Address Setup: Press the MODE button a number of times until Add appears on the display, with the UP /
DOWN buttons the start address may be set. The start address is defined as a first channel to which the
machine will respond to. Check that there are no overlapping channels used!
Note: It is necessary always lock the DMX loop with a 120 Ohm terminator for correct data transmission.
CHANNEL
VALUE
0 – 100%
1
2
000
001 – 010
011 – 020
021 – 030
021 – 040
041 – 050
051 – 060
3
061 – 070
071 – 080
081 – 090
091 – 100
101 – 110
111 – 255
0 – 100%
4
Location
Select a location where it is easy to fill the tank. It is also possible to hang the unit by means of the supplied
holder and fixing screws.
Switching the unit off
Switch the unit off by unplugging it from the mains. Otherwise the 2000W heating element will draw
unnecessarily current.
FUNCTION
Smoke level
No function
LEDs OFF
Color Change
Blue
Red
Green
Blue strobe
Red strobe
Green strobe
Blue fade
Red fade
Green fade
Blue/Red/Green fade
Color Change
Strobe +
Fade/change speed
function
- 4 -
Advertenties
Inhoudsopgave
