• Assemble
appliance onto the
mounting
with the two winged
nuts. The radiator
hangs
under
bracket, the cable at
the underside of the
appliance (see fig.).
• Adjust the desired
angle of radiation.
The
radiator
turn 115°: from half
upside
till
totally downwards. Pay attention that the radiator doesn't focus its
heat from a short distance at combustable materials!
• Fasten all screws another time firmly and scheck or the heater is
firmly mounted. Now your infra red heater is ready for use.
• For personal protection the installation, to which the EUROM
GOLDEN is connected, has to be equipped with an earth fall
device (max. 30 mAmp).
Under some circumstances it may be attractive to make a fast
connection between the heater and the main supply, and to operate
the heater with a switch. Because the EUROM GOLDEN has a high
water tightness (IP65) and for safety reasons, such a connection has
to be made by a qualified electrician.
WORKING
Check for every use:
- or the appliance doesn't show signs of damage.
- or the appliance still is fastened firmly. Mechanical bearing
pressure, oscillating duet o wind or rain could lead to loose.
- or there are no objects, canvas, sun screens etc. are inside the
safety distances.
- or the socket you want to use gives the correct tension (230V-
50Hz) and is grounded.
the
bracket
the
can
almost
13