Download Inhoudsopgave Inhoud Print deze pagina

Charging Battery; Installation And Remove Of The Memory Card; Video Menu Settings; Power On/Off The Camera And Auto Shut Down Settings - Gembird ACAM-001 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

 
 

1.2 Charging battery

1. Using the USB cable: connect the device to the USB port of a computer/Laptop
2. Using the car changer: Connect the device to the car charger. The device will start charging after the car engine is
turned on. The device will automatically turn on and start recording. When the engine stops, the device will
automatically save the last file and turn off.
Normally it takes approximately 2-3 hours to fully charge the device. Operating the device while charging will extend
the total charging time of the battery.
Note: before using the device for the first time, please first fully charge the Li-ion battery.

1.3 Installation and remove of the memory card

1. Insert the memory card into the memory card slot according to the directional instructions until the memory card
is fixed in the card slot.
2. To remove the memory card, gently press down the memory card. This will allow the card to pop-up, so it can be
removed easily.
Note:
1. Before using the device for the first time, please insert a microSD card into the device.
2. Format the card before use and ensure that there is enough recording capacity.
3. Please note that the insertion direction of memory card, if reverse insert, it might damage the machine and the
memory card.
4. If the memory card and the machine is not compatible, please insert it again, or try again in a memory card.
2. Operation guide

2.1 Video Menu settings

1. In any mode of photo/photography/replay to press the "MENU" button to enter the corresponding MENU setting,
please see the table of contents for the details.
2. In any mode of MENU Settings, press the OK button to enter the next level MENU, press the up and down key
choose corresponding settings, press the OK key to determine , then press the MENU button to exit.

2.2 Power on/off the camera and auto shut down settings

1. Hold down the power button for 1 second to turn ON the camera. Press and hold the power button for 3 seconds
to turn the camera OFF.
2. To save battery power, the camera can be set to automatically power off within the settings menu. When the
 
GEMBIRD EUROPE B.V. http://www.gembird.eu
FULL HD ACTION CAMERA WITH WATERPROOF CASE
ACAM-001
5

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor Gembird ACAM-001

Inhoudsopgave