Advertenties
Beschikbare talen
Beschikbare talen
USER MANUAL LED TRONIC WALL DIMMER (duo) 2494
This duo light wall dimmer (2x 3-100W/VA) is suitable for incandescent, halogen
(230V, 100W max per channel) and dimmable led lamps (230V, 50W max per
channel) and 12V light sources incombination with a dimmable electronic
transformer (AC) or dimmable LED driver (DC) (80W per channel). This dimmer
prevents peek currents which can negatively infl uence the lamps lifetime.
Operation of the dimmer: after safe installation, push the turn/push button
to (per channel) switch on (lamps on). Turn the knob to minimal value entirely
to the left. By means of two adjustment screw (use a small screwdriver to
adjust) the minimal start illumination value (in lowest dimmer level) of both
connected lamps can be set per channel independently. Phase-cut dimmer
('R,C'), 230V/50Hz.
INSTALLATION:
• Before installation, shut off the power of the mains for the lightswitch
• Strip the wires suffi ciently (about 5 mm)
• Connect the dimmer according above shown drawing
• Fasten the dimmer housing into the wall junction box
• Adjust the minimal dimming level (per channel) with the adjustment
screws (2)
• With the dimmer turn knobs (1) the illumination per channel can be
determined
• Place back the cover plate on the dimmer and place the knobs
The manufacturer is not responsible for damage, caused by misuse or improper installation of
the dimmer. The warranty period is 2 year after date of purchase, to be demonstrated to your
specialist dealer by means of your purchase receipt.
TRADIM Aalsbergen 9, 6942 SE Didam, The Netherlands www.tradim.nl
1
2
Advertenties
