Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
The follow overview will help you understand possible problems. However, only qualified
technicians should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
The appliance does not work
(diplay off).
The appliance does not get warm.
E01
E02
E03
E04
E05
E06
E07
E08
Spangenberg International B.V. – Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Possible Cause
▪
The appliance is switched off.
▪
The power supply is
interupted.
▪
The voltage is not correct.
▪
Wrong temperature settings.
▪
Appliance defective.
▪
Appliance too hot /
insufficient ventilation.
▪
Appliance near another heat
source.
▪
Overheated
▪
Sensor damaged/dirty.
▪
Voltage too high (>265V)
▪
Voltage too low (<135V)
▪
Oil temperature sensor
defect.
▪
Heating elemement (sensor)
short circuit.
▪
Heating elemement (sensor)
open circuit.
▪
Heating elemement (sensor)
overheated.
info@maximaholland.nl
-
www.maximaholland.com
Possible Solution
➢ Switch on the appliance.
➢ Check the power supply, plug
in power cable.
➢ Use a compatible power
source.
➢ Change settings.
➢ Contact supplier.
➢ Make sure the air vents are
unblocked.
➢ Relocate appliance or other
heat source.
➢ Let the appliance cool down,
reset limiter and restart.
➢ Let it cool down, reset limiter
and restart.
➢ Replace/clean sensor.
➢ Use a compatible power
source (check rating label).
➢ Use a compatible power
source (check rating label).
➢ Contact supplier.
➢ Contact supplier.
➢ Contact supplier.
➢ Contact supplier.
Advertenties
