Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
BAsIc FeAtures & pArAMeters
Model
*680.070 - *680.072
*680.071 - *680.073
precAutIons & recoMMendAtIons
trAnsportAtIon And storAge
During transportation, the machine should be carefully handled and do not put it upside down to prevent
from damaging to the shell and inside. The packaged machine should be stored in a ventilated warehouse
without corrosive gas. If it needs to be stored in open air temporarily, measurement against raining is
needed.
notIce For InstAllMent
1. The supply voltage should comply with the working voltage of the appliance.
2. The appliance is equipped with an earth bolt at its back, which should be connected with copper wire
no less than 1.5mm² and earth wire that conforming to safety regulations reliably.
3. After installation, check that whether the connection is loose, whether the voltage is normal and whether
the safety grounding is reliable.
4. The appliance should be positioned at a stable area with a minimum clearance of 10cm away from
non-combustible substances (e.g. walls, windows etc.) on both sides, and 20cm at back side.
5. The fixed arrangement of wire should be equipped with an all-pole disconnecting switch with a contact
opening of 3mm on its poles. It is advisable to install a grounding leakage protection switch. Do not pile
up sundries in front of the switch, for convenient operation sake.
6. Vicinity of the mounting position should not store flammable or explosive objects. The ambient tempera-
ture should be lower than 45°C and the relative humidity should be below 85%.
7. Installation of the appliance should be done by professional technicians.
special notice
1. This product is a commercial machine that needs to be operated by trained cook, not applicable for
household use.
2. Do not sway or tilt the appliance during operation.
3. Do not dismantle or self-modify the machine. Dismantlement and self-modification may cause casualty.
4. Before cleaning, unplug and cut off the power supply.
5. During cleaning, do not aim at the appliance with water jet. Water may conduct electricity, that may
cause electric shock due to leakage.
6. Do not pat the product or put any heavy objects onto it. Abnormal operation may cause damage and
danger.
7. High temperature may cause scald. Do not touch the appliance with hands directly due to high tempera-
ture during or after operation.
8. To prevent damage, turn off the switch ASAP when near the thunder zone.
9. Do not destroy the control panel with hard or sharp objects.
10. After working, turn off the switch.
11. If the power cord is damaged, to avoid hazard, substitution should be done by manufacturer or its main-
tenance department or similar professional personnel.
688070-1-2-3 nl-en ma 2016
voltage (v)
220~230V/50Hz
220~230V/50Hz
power (kW)
1.67~1.84
1.67~1.84
dimension (mm)
660 (H)×690×440
660 (H)×900×480
11
Advertenties
Hoofdstukken
Inhoudsopgave
