Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
a) Setting the time formats
Two different time formats can be displayed. To toggle between time formats, press and hold the CLOCK
button (2) until the display changes.
12-hour display 11:59 to 12:00 with AM or PM
24-hour display 00:00 to 23:59
b) Setting the weekday
1. Press and hold the SET button (4) until the day of the week flashes on the display. The days are
displayed in the following order: Mo Tu We Th Fr Sa Su.
2. To scroll through the screen in the order shown, press the "Λ+" button (5). The "V-" button (3) allows to
select the weekdays in reverse order. To scroll through the weekdays faster, press and hold the "Λ+"
or "V-"" button. Release the corresponding button as soon as the desired day of the week is displayed.
3. Confirm your setting by pressing the SET button or wait until the selected day of the week stops flashing.
c) Setting the time of day
After setting the day of the week, the hour indicator lights up on your display. Now set the current time of day.
1. To increase the number of hours, press the "Λ+" button. Pressing the "V-" button allows you reducing the
number of hours. To scroll through the hour display, press and hold the "Λ+" or "V-" button. Release the
corresponding button as soon as the desired number of hours is displayed.
2. Confirm your entry again by pressing the SET button. Then you can set the minutes. Repeat steps 1
and 2 of the time setting.
d) Setting the summer time
1. Press the CLOCK button and the "V-" button simultaneously to switch to summer time. An hour is added
to the current time. The display will show "S" permanently.
2. You can undo this setting by simultaneously pressing the CLOCK- and "S" buttons.
To set the day of the week and time, the time must be shown on the display. If you are in
programming mode, press the CLOCKbutton to return to the time display.
e) Programming mode
The programming mode can be started by pressing the "Λ+" button. "1ON" appears on the display. "1"
indicates the programme group. "ON" means that the device is switched on at the set time. "OFF" means
that the device is switched off at the set time.
1. The programme group can be selected using the "Λ+" and "V-" buttons as described in c) "Setting
the time of day". The groups are displayed as follows: 1ON, 1OFF ... 20ON, 20OFF and d ON/OFF
(Countdown).
When you have selected the desired programme group, press the SET button. You can now select the
desired weekdays or weekday combinations for this programme. To do this, press the "Λ+" button. The
display shows the days of the week or weekday combinations in the following order:
MO TU WE TH FR SA SU
MO � TU � WE � TH � FR � SA � SU
MO WE FR
TU TH SA
SA SU
MO TU WE
TH FR SA
MO TU WE TH FR
MO TU WE TH FR SA
2. Press "V-" button to display the combinations in reverse order.
3. Confirm your setting by pressing the SET button.
4. After the weekday setting, you can now set the associated hours. Please observe steps 1 to 2 in c)
"Setting the time of day".
5. To set other programme groups or to change your set programme, repeat steps 1 to 4 in this section.
Example:
A device should be activated on Monday between 10:00 and 10:10.
Set the programme 1ON to Mo, 10:00. Your device will be switched on at this time. To switch off the
device at 10:10, set the programme 1OFF to Mo, 10:10. Your device is switched off from this time point.
To reset a programme, enter the programming mode. Select the appropriate programme and
press the ON/OFF button (9).
To return to the time display, press the CLOCK button. Alternatively, the display automatically
returns to the time display after 15 seconds.
f) Countdown
1. The countdown starts from the current real-time display.
2. If you are in the real-time display, press the "V-" button to use the countdown mode. The display will
show "d ON" (or "d OFF"). "d" indicates the activated countdown mode. If "d ON" is set, your device
will be switched on until the counter expires. If "d OFF" is set, your device will be switched off until the
countdown expires.
3. Press the SET button to start the settings. You can set the number of hours, minutes and seconds. To
set the desired number, proceed as described in b) "Setting the weekday". The number of seconds is
also set equivalent to the number of hours.
4. Press the C.D. button (8) to start the set countdown. Press the C.D. button again to end the countdown
mode.
Press the "V-" button to display the countdown details.
To change your settings, repeat steps 1 to 3 in this section.
g) Random mode
The random mode switches your devices on and off at irregular intervals.
1. Start the random mode by pressing the RND button (7). Your devices will be switched off for 26 minutes
to 42 minutes. The switch-on phases last for 10 minutes to 26 minutes.
2. To disable the random mode, press the RND button again.
Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
housing or cause the product to malfunction.
• Disconnect the timer from the mains before cleaning.
• Do not immerse the product in water or other liquids.
• Never open/disassemble the product as it has no parts to be serviced.
• A dry, soft and clean cloth is sufficient for cleaning. Do not press too hard on the housing, as this can lead
to scratch marks.
• Dust can be easily removed using a soft and clean long-haired brush.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste
at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately
from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by
the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner,
must be removed by end users from the WEEE in a non-destructive manner before it is handed
over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options free of charge (more details on our website):
• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by
manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
Technical data
Operating voltage ................................. 230 V/AC, 50 Hz
Backup rechargeable battery ................ 1x 1.2 V, 40 mAh NiMH rechargeable battery, not interchangeable
Switching capacity ................................ max. 1800 W
Switching current .................................. max. 8 A
Standby power consumption ................ approx. 0.75 W
Protection type ...................................... IP44
Enhanced protection against
accidental contact ................................. yes
Programmes ......................................... max. 140 on and off programmes per week
Time setting interval ............................. 1 minute (countdown mode 1 second)
Time display ......................................... 24 or 12 hours
Storage/operating temperature ............. -10 to +50 ° C
Dimensions (W x H x D) ....................... 90 x 134 x 63.5 mm
Weight .................................................. 179 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.
*2106308_v2_1023_02_dm_mh_en
Advertenties
Inhoudsopgave
