Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3
installation of the mixer tap
• Safety during use is only guaranteed if the assembly has taken place in a technically correct way and in accordance with
these installation instructions. The installer is liable for damage caused by incorrect assembly.
• In case of incorrect installation or connection, the warranty becomes invalid.
• The nominal pressure of the mixer tap is 0.3MPa and the tap is able to function with a water pressure of 0.05-0.5MPa
(including hot and cold water pressure).
• The mixer tap is suitable for indoor use with an average temperature of 4-70°C.
• During assembly, make sure the hot and cold water connections are correct.
• Tools to be used: screwdriver, water level, teflon tape and a drill, if there is no tap hole in the worktop yet.
1.
4.
Rinse the mixer tap clean before using it.
Unscrew the perlator and turn on the mixer tap for a number of minutes (fig. 6).
Turn off the mixer tap and screw back the perlator.
The mixer tap is ready for use.
10
•
English
2.
5.
3.
6.
Advertenties
Inhoudsopgave
