Advertenties
26
*NOTES*
1)
Any combination with control codes and escape codes other than above is disregarded by IF-50 and
the typewriter does not operate.
2)
Space operation when code 20H is sent independently.
Code 7FH is disregarded when sent independently.
3)
Letters 20H and 7FH of each code table by nation are printed respectively as
ESC
+ Y and
ESC
+ Z
4)
Line feed and paper feed are also made by LF + CR and CR+ LF. At LF +
LF
and CR+ CR. return is
doubled.
5)
Also refer to the following table.
Function
Control by computer
Control by keyboard
Switching
Possible (by code)
Possible (by switch)
EM-100
Possible (by code)
Line and
EM-200
Indication
print pitch
CORRECTRO-
Possible
(by switch)
NIC 50
COMPACTRO
-
Not possible (by code)
NIC 60
EXECUTRON 65
Margin
Setting is possible
Correction
Not possible
Possible
Return
By any one of
By
return key
CR.
LF.
CR+LF. or
LF+CR
JIS code
Print
codes of 8 bit which are not
------------
defined are disregarded.
Switching by code is impossible.
Keyboard switching
The
select switch is turned
from
Switching
OFF to ON after wheel change.
6)
Auto-mode set and paragraph indent are turned to
NORMAL
when
the
code sent out again.
(CORRECTRONIC 50. COMPACTRONIC 60.
EXECUTRON
65)
7)
Correct the setting
if the margine
at computer side is
longer than the margin
set on
the typewriter.
8)
When
the keyboard switch is operated.
first turn to de-select mode then to
select
mode
again
before
use.
Advertenties
