Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USE
Timer function
The timer function can be used to switch the fan off automatically after
a certain period of time. The shutoff time can be set at intervals of 10
minutes up to a maximum of 90 minutes.
Switching off the fan automatically
• Switch the fan on and press the timer button (4).
'0' flashes in the display, indicating that the timer function is active.
• Set the shutoff time using the '+' / '>' button (2).
Each setting in the display corresponds to a shutoff time of
10 minutes:
▷ 1 in display = 10 minutes
▷ 2 in display = 20 minutes
▷ etc.
• Press the timer button (4) again.
The set time and speed are saved. The display stops flashing and
shows the set speed. A flashing dot in the display indicates that the
timer function is active.
• Press the timer button again to stop the timer function.
If the time and speed are not saved within 20 seconds, the timer
function switches off again.
Switching button illumination on and off (appliance control)
• Press and hold the timer button (4) for a few seconds.
The button illumination comes on.
• Press and hold the timer button (4) again for a few seconds.
The illumination switches off.
EN 7
Advertenties
Hoofdstukken
Inhoudsopgave
