Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Never vacuum liquid with the filter
with basket around the floater!
Insert the plug into the socket.
Press the switch on/off to I to turn on. Type
1240 has 1 switch which is used to engage
the power. Type 2070 has 2 switches, type
3080
has
corresponds to 1000w of power.
After use, switch the device off by pressing
the switch(es) on/off to O and remove the
plug from the socket. Wind the electrical
cable around the cable hanger. Type 1240:
Place the accessories at the appropriate
locations behind the device.
Safeguards
If you are sucking up water and the container is full, a float will cut off suction. The
motor will produce a noise that sounds like high revs but, in fact, the machine will
no longer suck effectively. In this event, switch the unit off and remove the plug
from the socket. Empty the container; you can then carry on using the device as
normal.
Cleaning and maintenance
Before cleaning or maintenance: always switch off the equipment and unplug it.
Emptying the container
Dry: Bad suction usually points to a full container. Open the clips, lift the container
cover and remove filter and basket. Empty the
container. Types 2070 and 3080 are equipped
with a tipping handle and a tipping bracket, see
image.
Wet: Types 2070 and 3080: Disconnect the
drainage hose and empty it into a drain or
similar. Remove the cap off the end of the hose.
The container can now be emptied. In order to
remove the final traces of moisture, tip the
container, see image. Type 1240: Open the clips
and lift the container cover. Empty the container
by pouring out any water.
After emptying, replace all parts in original positions.
3
switches;
each
switch
14
Advertenties
Inhoudsopgave
