Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.2 REMOTE CONTROL OPERATION
Warning: It takes some time for the receiver to respond to the transmitter. Do not press the buttons more than once
within two seconds for correct operation.
Decrease Brightness
Operation
Setting
Flame effect
Flame effect & 750W heat setting
Flame effect & 1500W heat setting
To turn off any of the settings press the 'OFF' button once.
To increase or decrease the brightness of the fuel effect use the buttons as shown in Fig. 5.
5.3 MANUAL OPERATION
Decrease
Increase
Brightness
Brightness
Operation
Setting
Flame effect
Flame effect & 750W heat setting
Flame effect & 1500W heat setting
To turn off any of the settings press the 'O' button once.
To increase or decrease the brightness of the fuel effect use the buttons as shown in Fig. 6.
Off Button
Operation
Press the 'ON' button once
Press the 'ON' button again
Press the 'ON' button again
Off
On
O O
F
F
Operation
Press the 'I' button once
Press the 'I' button again
Press the 'I' button again
- 4 -
On Button
Increase Brightness
Standby Switch
O
N
Fig. 6
UK
Fig. 5
Indication
Left Neon
Left & Middle Neon
All 3 neon's
Note: The Standby Switch
must be first turned on to
operate either the manual or
the remote controls. The red
indicator mark on the switch will
be visible when it is turned on.
Indication
Left Neon
Left & Middle Neon
All 3 neon's
Advertenties
Hoofdstukken
Inhoudsopgave
