Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3
before first use
Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner from the packaging
and remove all traces of packaging from the device and any promotional stickers. Keep the packaging (plastic bags and cardboard)
out of the reach of children. After unpacking the vacuum cleaner, check the device for external damage that may have occurred
during transport. Place the vacuum cleaner on a secure, dry and level surface.
4
assembly
Make sure the vacuum cleaner is unplugged before (dis)assembling any parts.
HOSE
Connecting the hose to the appliance: insert the hose end into the hose socket at the front cover and then lock it by turning it
clockwise until you hear a click.
Disconnecting the hose from the appliance: make sure the vacuum cleaner is unplugged. Turn the hose end counter clockwise to
disconnect it from the appliance.
TELESCOPIC TUBE
1. Connect the handle of the hose into the telescopic tube until it clicks.
2. Set the telescopic tube to the desired length. To do this, pull the slide button upwards and pull the top part of the tube out of the
bottom part to make it longer. Release the slide button and let the tube snap into place.
3. Attach the floor nozzle by firmly sliding the tube into the nozzle.
4. Disconnect the hose from the tube press the button of the click system and pull the hose handle out of the tube.
ACCESSORIES
Connect the different nozzle tools to the tube or the handle of the hose for different cleaning purposes by
firmly sliding the handle into the nozzle.
1. Round nozzle: can be used to clean furniture, corners of the sealing and blinds
2. Upholstery nozzle: can be used to clean matrasses, seats of chairs and pillows
3. Crevice nozzle: can be used to clean corners and tight areas which cannot be reached with
the combi-brush
4. Accessory holder: the accessory holder can be attached to the telescopic tube. The accessories can be
attached to the holder so that they are always within reach during use.
5
use
Check that the voltage stated on the device's information plate matches the voltage used in your region.
TURNING THE VACUUM CLEANER ON
1. Place the vacuum cleaner on a dry and level floor.
2. Pull out the cord by the plug and insert the plug into a power socket.
3. Turn the vacuum cleaner on by pressing the on/off foot pedal
4. Depending on the surface you want to vacuum, you can adjust the suction power. Slide the suction power button left or right in
between the min and max indicators.
Minimum power level: for delicate materials
Medium power level:
Maximum power level: tiles, wood or other hard floors
5. Depending on the type of floor you want to vacuum, you can adjust the floor nozzle.
For cleaning hard floors, make sure the brushes in the floor nozzle are down.
For cleaning carpeting or a carpet, make sure that the brushes in the floor nozzle are retracted.
When it is hard to move the brush over the surface you can decrease the suction power with the button to set the suction
power min - max or open the the additional suction power control on the handle of the hose.
TURNING THE VACUUM CLEANER OFF
1. Turn the vacuum cleaner off by pressing the on/off foot pedal
2. Unplug the vacuum cleaner, hold the plug and automatically rewind the cord by pressing the cord rewinding foot pedal
the cord with your hand to prevent possible damage. The power cord will be drawn in the vacuum cleaner.
16
•
English
furniture, carpets and matresses
.
.
2
1
3
4
. Guide
Advertenties
Inhoudsopgave
