Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CANCEL SETTINGS
The timer and the automatic function settings may be cancelled at any time.
• Press the keys [ < ] and [ > ] simultaneously to cancel the automatic function settings.
• Press the [ OK ] key to select the timer settings and then press the keys [ < ] and [ > ] simultaneously to cancel the timer.
CHANGE THE TONE OF THE ALARM SIGNAL
The tone of the alarm signal may be changed as follows:
• Press the keys [ < ] and [ > ] simultaneously.
• Select with the [ OK ] key the function ton. The display will flash.
• Select with the key [ > ] the desired tone in the following order: ton 1, ton 2 or ton 3
or
• select with the key [ < ] the desired tone in the reverse order: ton 3, ton 2 or ton 1.
ADJUSTING THE BRIGHTNESS OF THE DISPLAY
You can adjust the brightness of the display in the range of 1 to 9, where 1 is the darkest and 9 is
the brightest. The brightness setting applies to an inactive control panel, i.e. when none of the
controls are used 7 seconds.
• Press the keys [ < ] and [ > ] simultaneously.
• Press the [ OK ] key repeatedly to select the bri setting. The settings can be accessed in
sequence ton (tone) and bri (brightness).
• Select the desired brightness with the key [ > ] in the following order: 1 to 9
or
• select the desired brightness with the key [ < ] in the reverse order: 9 to 1.
Note: The display is at its brightest setting when active, i.e. a control was touched within the last 7 seconds.
NIGHT MODE
The display is dimmed during the night hours: 22:00 - 6:00.
OK
OK
39
English
•
Advertenties
Inhoudsopgave
