Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
12
REPLACEMENT
1. Power off and unplug
the device
2. Open the front cover
Pull out the front cover
4. Remove the old filter
Take out the filter
1
28
PRE-FILTER REPLACEMENT
PRE-FILTER
3. Attach dustproof sticker
Attach a dustproof sticker to the front filter to
prevent dust from flying
when the filter is
removed
Dustproof
sticker
Place the filter on a flat surface, gently remove
2
the pre-filter, and remove the dustproof sticker
with the old pre-filter
12
REPLACEMENT
5. Replace with new pre-filter
Put the new Breathe Carbon or Breathe Bio
pre-filter to the velcro on the main filter
6. Install new filter
Insert the filter into the device in the direction
1
of the arrow shown in the figure
※ Make sure the filter is installed in the right direction
7. Reset filter life
After the replacement is completed
and the front cover is put back, wait
for the WiFi to reconnect.
Enter the BRISE APP device page, click
the "
" filter button, click "Reset" to
complete the pre-filter replacement
Or long press "
" device
filter indicator for 5 seconds
※ If the filter type is changed, please press
the "Change" button to select the correct
filter type
PRE-FILTER
Put back the front cover
2
PRE-FILTER REPLACEMENT
29
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
