Advertenties
Beschikbare talen
Beschikbare talen
ATTENTION:
To obtain an optimal fixation of the double sided adhesive tape the temperature at mounting should
not be lower than 15°C!
Mounting
1.
Clean the mounting surfaces on the car with degreaser.
2.
Test the fit of the entry guards on the car and mark their correct position with tape.
3.
Remove the protection foil of the double-sided adhesive tape on the entry guard.
4.
Mount the entry guards in the car and press well.
ATTENTION:
In case of poor degreasing the double-sided tape will not adhere sufficiently.
Clean the stainless steel regularly with a non-aggressive and non-abrasive product.
These problems are excluded from the warranty.
ASSEMBLY INSTRUCTIONS
Hyundai ix20 entry guard set
Art.nr.
: HYU1X2EG
Material
: stainless steel
Parts list
:
Part
Entry guards front + rear
Required tools:
-
degreaser
-
tape
HYU1X2EG NL-ENG-D-F-D / Rev. 0
Van Hilststraat 4
5145 RL Waalwijk
The Netherlands
tel: +31-416-344 778
fax: +31-416-344 984
www.aldorautomotive.com
Qty
2 + 2
Advertenties
