Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3
before first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any
damage, possible from transportation. Clean the glass with a damp cloth. Check that the voltage in your home corresponds with the
voltage printed on the bottom of the appliance. Follow the installation instructions in chapter 7 for installing the hob.
4
operation of the appliance
After the mains voltage is applied all displays can light up for a moment. After that, the hob is in stand-by mode and is ready for use.
The hob is controlled with electronic sensors which are operated by touching the related keys. Each sensor activation is followed by a
sound signal.
SWITCHING THE APPLIANCE ON
Switch the hob on by touching the ON/OFF key for a few seconds. The displays of the cooking zones all show [0.] and the dots blink.
there is no cooking zone selected within 10 seconds, the hob will automatically shut off.
SWITCHING THE APPLIANCE OFF
Switch the hob off at any time by touching the ON/OFF key for a few seconds.
The ON/OFF key always has priority in the switch off function.
SWITCHING ON A COOKING ZONE
Press on the key of the cooking zone you wish to use. There is a static dot indication on the selected cooking zone display and the dots
on the other displays turn off.
Place the pan on the cooking zone. Select the heat setting by using the increase heat setting key
.
To get food quickly to the boil, select the desired heat setting and touch the P key to activate the Boost function.
BOOST FUNCTION
The Boost function gives extra power and can be activated for each cooking zone. A cooking zone must be selected and the heat
setting must be set with the
selected cooking zone shows an
The duration of the Boost function depends on the selected heat setting of the corresponding cooking zone.
Setting + Boost
Boost function automatically shuts off after
Setting 1 + A
Setting 2 + A
Setting 3 + A
Setting 4 + A
Setting 5 + A
SWITCHING ON THE TRIPLE COOKING ZONE
Selecting a second or third cooking ring, is only possible when the related cooking zone is selected and the heat is set. The display
must show a dot next to the heat setting.
Press the
key to activate the second cooking ring. The indicator for the second ring lights up [
activate the third ring. The indicator for the third ring lights up [
go out.
20
•
English
key and not with the + key. The Boost function is now automatically activated. The display of the
and the selected heat setting.
1 minute
2 minutes
3 minutes
4 minutes
5 minutes
Setting + Boost
Boost function automatically shut off after
Setting 6 + A
Setting 7 + A
Setting 8 + A
Setting 9 + A
-
]. To switch off the extra rings, press the
or the decrease heat setting key
6 minutes
7 minutes
8 minutes
9 minutes
-
]. Press the
key again to
key until the indicators
If
Advertenties
Inhoudsopgave
