Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
06
KICKSPACE
®
500E ECO & 600E ECO
5.0 Controls
(continued...)
Programme Mode
A quantity of 9 built-in (P1-P9) and 4 user defined (U1-U4) timed
programme options are available to choose from. Each day is
divided into 48 half hour periods operating in comfort mode.
User Programme Menu
1. Select P by pressing
until 'ProG' is displayed.
2. Press (OK) twice and the programme number will begin
to blink.
3. Use
or
to select a user defined programme (U1-U4).
4. Press and hold (OK) for 3 seconds to edit the programme.
5. The hour will now display, also note the segments on the
bottom of the display will begin to blink
- Press
to set this half hour as night set back
- Press
to set at comfort mode
- Note when pressing
or
you will automatically
move to the next half hour.
Built-in Programme Selection
1. Select P by pressing
until 'ProG' is displayed.
2. Press (OK) twice and the programme number will begin
to blink.
3. Use
or
to select required programme (P1-P9).
4. Press (OK) to confirm the chosen programme.
6. When you reach the final segment (23:30) press (OK) to move
to day 2 here you have the option to copy the same programme
that you have just created or create an alternative programme
a. To copy the programme press (OK) while YES is displayed
this can be copied to each day individually and it is
also possible to copy a number of days but then
change other days to an alternative programme by
selecting NO then pressing (OK)
b. To create an alternative programme for individual days
use
or
to change YES to NO then press (OK)
and repeat from step 6.
7. After completing the last day the word SAVE will appear,
press (OK) to save changes.
The thermostat will then automatically enter AUTO mode to
follow the selected programme.
EN
EN
5.0 Controls
(continued...)
Installer's Set-up Parameters
To access the installation parameters menu, press and hold (OK)
for 10 seconds. Use
or
to highlight the parameter to be
adjusted then press (OK) to toggle the parameter setting, when
Parameter
Name
rF ini
Manually pair the thermostat to the receiver
At
Myson Smart Start (Adaptive Start) Thermostat will learn
to achieve temperature by time requested
oP
Window open detection, product will switch off if a large
temperature drop is detected (usually caused by an open
window / door)
Lt
Room temperature limiter (limits the maximum room
temperature set point)
Ch
Automatic daylight saving time adjustment
CL
Reverts the control back to factory settings
UE
Version number
End
Exit the installation menu
Fan Only Mode
If required, the unit can be used in summer for air circulation
without heat.
• Set the fan only/off/heating switch to fan only (blue dot)
• Adjust fan speed to required setting
6.0 Appendix
Heating Performance Data
Model
Output switch
Low (l)
500E ECO
Boost (ll)
Low (l)
600E ECO
Boost (ll)
Sound Levels
Sound Pressures at 2.5m (dBA)
Model
Low
500E ECO
22.7
600E ECO
24.4
Sound levels tested in accordance with EN 23741.
KICKSPACE
the value starts to blink, use
press (OK) to confirm. Once parameters are set, go to <End>
parameter and press (OK) to go back to the main menu.
Description
Default Setting
Press (OK) to begin pairing
Yes
Yes
30°C
Yes - automatic
Press and hold OK for 10 seconds to reset
n/a
Note: This mode will by-pass the wireless programmable
thermostat and also breaks the pairing link therefore when
switching back to heating mode it may take up to 5 minutes for
the thermostat to automatically pair with the receiver.
Weight and Rated Power
Heat Output (Watts)
Model
Rated Power (W)
1000
500E ECO
2000
600E ECO
1500
3000
High
36.0
42.6
®
500E ECO & 600E ECO
07
or
to adjust the value. Then
Alternative Setting
No
No
20°C< TR MAX <30°C
No - manual
n/a
Press OK
Unit Weight (kg)
2025
3.1
3040
3.6
Advertenties
Inhoudsopgave
