Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The appliance can be installed under a worktop or in a wall unit (open
or closed) with the appropriate dimensions for recessed installation.
Centre the oven in the unit so as to ensure a minimum distance of
10mm between the appliance and the surrounding unit. The material
of the unit supporting the appliance must be heat resistant (or
covered with a heat resistant material). For greater stability, attach the
oven to the unit with two screws through the holes provided on the
side panels.
If the appliance is to be installed under a worktop, ensure the top rail
has been removed to provide free airflow around the product.
Do not use your appliance immediately after moving it from a
cold location, as condensation may cause a malfunction. Wait
approximately 1-2 hours before use.
min450
564
40
560
Page 5
Version 3-2023
556
min455
432
min3
455
552
EBM4545-2BL
min450
40
560
Installation Instructions
All electrical work must be carried out by a suitably qualified and authorized
electrician.No alterations or willful changes in the electricity supply should be
carried out.
Mains lead should be minimum 1.5m long.
Do not connect your Built in Oven to the mains electricity supply using an
extension lead.
This appliance must be earthed.
If you are unsure of how to install the oven Use an authorised agent to install
the appliance to your electricity source.
Before setting up you're built in oven, check for any external visible damage.
Do not install or use your oven if it is damaged.
This appliance must be installed on a flat surface.
Don't install built in oven in an area that may be damp.
EBM4545-2BL
556
564
432
455
552
Version 3-2023
Page 6
Advertenties
Inhoudsopgave
