Paxton Access Ltd hereby declares that this product is in conformity with all the essential
requirements of the Directive 2014/53/EU.
The full declaration of conformity is provided at:
The full declaration of conformity is available on request. Contact details are provided at:
http://paxton.info/596
These products are not suitable for retail sale. All warranties are invalid if these products are not installed
by a competent person.
North America:-
Product compliance and limitations
To comply as a UL listed installation, the following conditions must apply:-
•
Server based functions (Antipassback, Time and Attendance, etc) have not been evaluated by UL and
cannot be used for UL 294 installations.
•
Where an equivalent cable / wire is used it must be ' UL Listed 'All interconnecting devices must be UL
Listed.
•
The use of Wiegand readers and the configuration software has not been evaluated by 'UL'
•
For CAN/ULC-S319 installations, terminals, leads and wiring methods must comply with CSA, C22.1,
Canadian electrical code, Part 1, safety standards for electrical installations.
•
The use of any add-on, expansion, memory or other module manufactured or supplied by the
manufacturer's representative will invalidate the CAN/ULC-S319 certification.
•
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and
the authorities having jurisdiction.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate the equipment.
Conformité et limitations du produit
Pour que l'installation répond aux normes UL, les conditions suivantes sont applicables:-
•
Les fonctions serveur (Antipassback, Pointage, etc.) n'ont pas été évalué par l'UL et ne peuvent pas être
utilisé pour les installations UL294.
•
L'utilisation des lecteurs Wiegand et le logiciel de configuration n'ont pas été évalués par 'UL'
•
Quand un cable équivalent est utilisé, il doit être 'listé UL'Tout appareil d'interconnexion doit être listé UL
•
Pour les installation CAN/ULC-S319, les terminaux, câbles et méthodes de câblage doivent être en
accord avec CSA, C22.1, code électrique canadien, Partie 1, standards de sécurité pour les installations
électriques.
•
L'utilisation de tout rajout, extension, mémoire ou module fabriqué ou fourni par le représentant du
fabricant invalidera la certification CAN/ULC-S319
•
Les méthodes de câblage doivent être en accord avec le code nation électrique (ANSI/NFPA70), codes
locaux et les autorités ayant la juridiction.
http://paxton.info/4687
http://paxton.info/3910
10