General care:
•
The correct use and maintenance of this stroller is essential.
•
Do not use excessive force when folding the stroller.
•
If you are having problems, fully open the stroller and repeat the folding procedure.
•
Always let wheels down as gently as possible when mounting and dismounting kerbs.
•
Always fold the stroller when going up or down stairs.
•
Never bump the stroller over these or similar obstacles.
•
In some climates mould and mildew can affect the fabric and rain cover. To avoid this, do
not fold the stroller when it is wet. Leave it open in a ventilated area until completely dry.
•
Always store the stroller in a dry place.
•
When storing the stroller in the car, never place other items on top of it.
•
Do not exceed the maximum load of 2 kgs in the shopping basket. (Where provided).
Cleaning:
•
Fabric covers and trims may be spot washed using mild detergent and warm water.
Leave to dry in a ventilated area away from direct sunlight.
•
Avoid leaving your buggy in direct sunlight for prolonged periods of time as this may
cause fabrics to fade.
•
Do not dry clean, machine wash or tumble dry.
•
Metal parts may be cleaned with a damp cloth.
•
Always wipe dry. Clean plastic parts with a mild soap and water solution, wipe dry.
Maintenance:
•
Maintain your stroller by lubricating all metal moving parts with a silicone based
lubricant. Do not use heavy machine oil or grease as this can attract dirt or grit.
•
Check that nothing is loose or broken and that no sharp edges have been exposed.
Inspect all joints and the harness, replace any damaged parts immediately.
•
Inspect any nuts and bolts regularly to ensure none have worked loose. Tighten as
necessary.
•
Only use replacement parts and accessories that have been approved by the
manufacturer. Failure to do this may invalidate your warranty.
Dit product wordt geïmporteerd door:
This product is imported by:
van Asten BabySuperstore
Ringbaan Zuid 5
5021 AA Tilburg
Geproduceerd volgens:
EN 1888-1:2018+A1:2022 & EN 1888-2:2018+A1:2022
Produced according:
EN 1888-1:2018+A1:2022 & EN 1888-2:2018+A1:2022