Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Press the on/auto/off button once, the indicator light in it will light up red. The
If the power supply is interrupted or the power cord is inadvertently disconnected
during use, the device will automatically resume from the point where the connection
was los, even without pressing any button. The condition for this is that the pause
does not last longer than 10 seconds. If the pause time is longer than 10 sec, the
display will show the default setting, the device will be restarted.
NOTE: remove the plug from the socket and let the appliance cool down before
148 mm
cleaning. Do not immerse the power cord or plug in water or other liquids to avoid
electric schock.
1. Clean all detachable parts in warm soapy water after each use.
2. Remove any stain on the outside of the device with a soft, damp cloth.
3. Water droplets can form above the funnel and drip onto the base during brewing,
4. Put all parts back so that you can use the coffee maker again.
Regularly remove any limescale that has formed to keep your coffee machine
working porperly. The frequency depends on the water hardness in your area and
how often you use the coffee maker. Remove limescale in the following way:
1. Fill the water tank up to the max mark with water and descaling agent (the water/
2. Place te coffee pot on the heating plate.
3. Check that there is no coffee powder in the funnel.
4. Turn on the device and let the solution run through.
5. Switch off the appliance after a cup has flowed through.
6. Let the solution stand for 15 minutes and repeat steps 3-5.
LCD will display the current clock. You can see the automatic start time by
pressing the PROG twice.
NOTE: you can cancel the auto start function by pressing the auto/off button
once to stop the machine. If you want to brew coffee immediately, press the
auto/off button again to start brewing immediately. If you want to change the
automatic start time, just follow the steps 1-4 above again.
When the time has elapsed, the blue indicator light in on/auto/off will stop
flashing and light up red, then the machine will start brewing coffee. The
appliance switches off automatically after 40 minutes if it is not switched off
manually after the brewing process is completed.
MEMORY
CLEANING AND MAINTENANCE
NOTE: do not clean the inside of the water tank. This can leave dust residue and
clog your coffee machine. Regular rinsing with cold water is sufficient
clean the area above the funnel after each use with a clean, dry cloth to prevent
this.
REMOVE LIMESCALE
descaling agent ratio is 4:1. refer to the descaling agent instructions for further
information). Instead of descaling you can also use citric acid. To do this, prepare
a solution of hundreds of parts of water and three parts citric acid.
105 mm
14
Advertenties
Inhoudsopgave
