Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TO REPLACE THE DUST BAG
MAINTENANCE
Never use this machine when the suction power becomes weak.
Make sure that the capacity regulator is in the right position and the sliding block is
closed.
Check or the dus bag is full; change it if necessary.
Check the filter. If this is dirty, clean it.
Check at last or the floorbrush, the suction pipe or the flexible hose are blocked by
any object. Remove it if necessary.
However, don't use the vacuum cleaner before the problem is solved!
14
By turning the capacity-regulator (10A) you
adjust the capacity of the motor and so the
suction power.
After use you can tidy up the attachments as
you see on the picture. Place the accessories on
the holders X.
It is not allowed to use the the vacuum cleaner
without dust bag. If the dust bag is full or
broken, replace it as soon as possible.
Switch off the equipment and unplug it. Open
both the locking blocks (11) en take the up
housing from the vacuum cleaner.
Remove the dust bag (Y), clean the barrel if
necessary and place a new dust bag.
Force the opening (Z) till over the ridge of the
exit of the flexible hose, so that the rubber locks
up correct!
At the end, place back the up housing and close
the locking blocks.
Advertenties
Inhoudsopgave
