Inhoudsopgave
Advertenties
8. ELECTROMAGNETISCHE COMPATIBILITEIT
European Council Directive 89/336/EEC requires electronic equipment
not to generate electromagnetic disturbances exceeding defined levels
and have adequate immunity levels for normal operation. Specific
standards applicable to this meter are stated below.
As there are electrical products in use pre-dating this Directive, they may
emit excess electromagnetic radiation levels and, occasionally, it may be
appropriate to check the meter before use by:
Use the normal start up sequence in the location where the meter will be
used.
Switch on all localized electrical equipment capable of causing
interference.
Check all reading are as expected. A level of disturbance is acceptable.
If not acceptable, adjust the meter's position to minimize interference or
switch off, if possible, the offending equipment during your test.
At the time of writing this manual (April 2016) Kane International Ltd are
not aware of any field based situation where such interference has
occurred and this advice is only given to satisfy the requirements of the
Directive.
This product has been tested for
compliance with the following
generic standards:
EN 61000-6-3 : 2011
EN 61000-6-1 : 2007
and is certified to be compliant
Specification
EC/EMC/KI/KANE3200/1 details
the specific test configuration,
performance and conditions of use.
Blz 10
Advertenties
Inhoudsopgave
