Automatic operation
Touch button "
" to set end time only after setting a cook time.
" 3 times, the end of cooking time icon
1. Touch button"
2. Turn the temperature knob to set the end of cooking time .
'will "
3. Touch "
" to confirm, the end of cooking time"
4. Oven stops heating when reaching the set end time, alarm sounds, the cooking "
time " and temperature icon will both be flashing.
5. Touch any button, the alarm signal will turn off, or the alarm signal will be turned off
automatically after 120 seconds.
Example
The current time is 2:00, set the cooking time to 1 hour, and the end of cooking time will be
"3:00", if the end of cooking time is not changed, you can press"
oven will stop heating at "3:00".
lf you turn the temperature knob to adjust the end of cooking time to "3:30" , and touch
'' button to save ,then the oven will start working at "2:30" and stop at "3:30".
the
Caution!
end of cooking time
End of cooking time
End of cooking time = current time + cooking time
End of cooking time will be displayed once saved, current time will not be visible.
We suggest that you supervise the first few cooks to make sure time and
temperature are right.
Then you can make adjustments to avoid over or insufficient cooking times.
Microwave time range:0<t
90min
" 'starts flashing.
" light is on, setting is saved.
" to save, then the
end of cooking time
Lighting function
● Press "
" to turn on/off the light when powered on.
● Light will be automatically be turned on while heating, touch "
or on, the light will turn off automatically after 1 min.
When functions conflict
● Turn off the oven, the cooking time("
of cooking time("
"j will be cancelled.
● Change the temperature setting during working, time count down stops, press
"
", it will continue.
● Press several keys at the same time, functions will not operate.
● Change the function during use, time count down will stop.
"
To get the best result when using the touch control panel press short and
swiftly
Tips: Make sure your fingers and buttons are dry and cool.
Door-checking switch
When in use , the text " door " will flash when the door is open,
dimmed constantly if door is closed.
" key to turn off
"jand the end