Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10W COB-LED Solar lamp with PIR
Note: please read this en re manual before installing this product
Opera ng Instruc ons:
1. Mount the light fixture in your desired loca on using the metal bracket with holes in it as the support
bracket. This bracket can be used as a stand and placed or bolted directly to the ground, to your house
or post. Adjust lt and ghten bolts on the fixture where the bracket meets it.
2. Find suitable area to place solar panel in full sunlight without shadows crossing the panel within the
wire length from the panel to the fixture. Aluminum frame of panel is drillable to allow you to customize
your own moun ng. It is recommended to place the panel at a 45 degree angle towards the sun for
maximum solar gain.
Note: Do not drill through the glass that recedes into the framing of the panel.
3. Connect white adapter piece on the wire from the panel to the corresponding adapter from the light
fixture.
4. Be sure fixture switch is in the "on" posi on, indicated by a Straight line (I), and charge for 4 to 8 hours
in full sun exposure .
PIR sensor Instruc ons
1. SENS(SENSITIVITY): SENS knob controls the sensi vity, the detec on area:lowest sensi vity = detects
all mo on within 5m, highest sensi vity = detects all mo on within 12m
2. TIME:TIME knob controls how long the Floodlight will stay on a er the last mo on has been detected,
the minimum TIME is 10-15sec, the maximum TIME is 3MIN.
3. LUX:LUX knob determines at what light level the Floodlight will start working, so it actually controls the
build-in light sensor.
SENS
TIME
as - Schwabe GmbH · Merkurstr. 10 · D-72184 Eutingen ·
LUX
English
www.as-schwabe.de
Advertenties
Inhoudsopgave
