Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
● Booster function can be activated only for a single cooking zone (in a pair), or for the
Bridge function.
● Booster function is automatically turned off after five minutes of operation.
● When the Booster function is active for one cooking zone, the heat setting of other cooking
zones is reduced below 2.
● If the initial heat setting was 0, the setting 9 will only be possible after 5 minutes.
Operation of the Booster function is limited to 5 minutes. Once the Booster function is
automatically deactivated, the cooking zone continues to operate at its nominal power.
The Booster function can be reactivated, provided the appliance electronic circuits and
induction coils are not overheated. When the pot is lifted from the cooking zone when the
Booster function is in operation, it remains active and the countdown continues.
When the appliance electronic circuits or induction coils overheat when the Booster func-
tion is in operation, it is automatically deactivated. The cooking zone continues to operate
at its nominal power.
Booster function can be activated on all cooking zones.
Two cooking zones (front and rear) form a pair. Booster function can be activated at any time
for one cooking zone in a pair.
If activating Booster function causes the overall power limit of a pair to be exceeded, the
heat setting of the other cooking zone in a pair will be automatically reduced. The amount
by which power is reduced depends on the type of pot used.
The Keep Warm function
Keep warm function allows for keeping food warm on a cooking zone. The selected cooking
zone operates at a low heat setting. Cooking zone's heat setting is automatically adjusted so
that food temperature is kept at a temperature of about 65°C.
Thanks to this, ready to serve, warm food retains its taste and does not stick to the pot's
bottom. This function can be also used to melt butter or chocolate. For the keep food warm
function to operate correctly, use a flat base pot or frying pan, so that base temperature is
accurately measured by the temperature sensor fitted in the cooking zone. The keep warm
function turns off after 8 hours.
● To activate the Keep Warm function touch the sensor (2), then touch the sensor (6)
and the cooking zone display will show the symbol.
● To turn off the Keep Warm function touch the cooking zone selection sensor field and then
touch slider sensor (1) to disable the Keep Warm function by selecting a desired heat
setting.
18
Advertenties
Hoofdstukken
Inhoudsopgave
