INSTRUCTIONS FOR INSTALLATION
• Check that the hook at the top of the glass window is in
position in the seating / U-shaped strip.
• Tip: Pull on the upper handgrip to move the glass frame
towards you: if it does not move, then it has been fi tted
correctly.
• NB: Fix the glass window's bottom strip in place with the
4 self-tapping screws.
• Push both bottom wedges downwards.
• Push the top wedges upwards until both fastening strips
and sealing cords press against the pane.
• Tighten each wedge's self-tapping screw.
• NB: Press on the wedge with your hand to hold it in
place while you tighten the screws.
• Tighten the middle self-tapping screw in each fastening
strip.
• Fit the horizontal decorative strip.
• Fit the vertical decorative strips.
fig. 18
fig. 20
fig. 22
For safety reasons a guard should be placed in
front of the fire at all times.
26
fig. 17
fig. 19
fig. 21
fig. 23