Download Inhoudsopgave Inhoud Print deze pagina

Electrical Connection - Novy Agora 6140 Gebruiksaanwijzing En Installatievoorschriften

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Maintenance
Maintenance of the grease filter
The hood contains one metal filter which should
be cleaned twice a month.
Access to the filter
The hood is equipped with two metal grease
filters, which, according to the frequency of use,
have to be cleaned at least every month.
Remove the grease filters by pulling down the two
stainless steel hinged lower cover plates at the
front side, which cover the grease filters. Pull the
two metal grease filters out by the little hook.
Cleaning the filter:
• in the dishwasher
• manually: in a hot solution of water and a
liquid detergent. Rince and allow to dry com-
pletely
Important! The previous instructions need to
be followed. If not an increased fire hazard
may occur.
Maintenance of the hood
Please allow the lights to cool down sufficiently
before cleaning the hood.
Use a soft, wet cloth and a mild detergent to clean
the hood.
Never use aggressive, abrasive detergents or
sponges. Bleach will damage stainless steel.
The stainless steel surfaces can be treated with
Novy Inoxcleaner (906.060) after cleaning.
Agora Elyps Wand 6140.indd 13
Replacing the lamps
Please allow the lights to cool down sufficiently
before touching them. Cover and protect delicate
surfaces underneath the hood when changing
lamps.
Put a screwdriver in the saving around the spot.
Lift the brim up with the screwdriver. (the brim and
glass are removed now).
Now you can remove the spot of 20 W.
Do not touch the spot with your hands, that
reduces the lightprofit.
Now mount the glass back in the same place.
The hoods have 2 spots of 20 Watt.
Total energy consumption with lightning:
for 6140: 109 Watt

Electrical connection

Electrical output: electrical cord + plug with
ground. To be plugged into socket with ground.
Check for compatibility with information on type
plate (behind filter).
Socket must be within reach.
Changes or replacement of the electrical cord
should be performed by a professional only.
Dimensions: p. 14
Electrical scheme: p. 15
13
15/06/11 17:12

Advertenties

Inhoudsopgave
loading

Inhoudsopgave