Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note: please store different foods according to the compartments or target storage temperature of your purchased products.
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent
mould developing within the appliance.
WARNING -Food needs to be packed in bags before putting into the refrigerator, and liquids need to be packed in bottles or
capped containers to avoid the problem that the product design structure is not easy to clean.
6
cleaning & maintenance
CLEANING THE LARDER
Frost settles on the rear wall of the cooling compartment. It is removed automatically. During the defrosting, the condensate,
which can contain contaminants may clog the water discharge opening. Should it occur, carefully unclog the water discharge
opening with the cleaning plug.
• Turn the thermostat off [OFF] and unplug the appliance.
• Open the door and remove the food. Keep the contents of the larder in a cool place and wrapped in blankets or newspapers.
• Clean the interior of the appliance. Use warm water and a neutral detergent to prevent any bad smells occurring. After cleaning,
rinse the interior with clean water and rub dry.
• Leave the appliance to dry for 1 to 2 hours. Simply remove the drawers, the glass shelves and the door compartments to clean
them by hand. Do not clean the interior accessories in the dishwasher.
• Clean the outside of the appliance and the gasket with a soft moist cloth.
• Switch the thermostat on to the right setting. When the larder reaches its correct temperature, replace the food items.
For areas that are difficult to clean in the larder, such as narrow gaps or corners, it is recommended to wipe them regularly with a
soft rag, soft brush, etc. When necessary use some auxiliary tools, such as thin sticks (tooth picks), to ensure no contamination
can accumulate in these areas.
Clean the outside of the larder and the door gasket with mild soap and water. Use a soft moist cloth.
We recommend that you dust the back of the appliance and on the floor with a cloth or vacuum cleaner once a year in order to
maintain a good output and low energy consumption.
Do not use hard brushes, cleaning steel wire balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as alcohol,
acetone, oils, etc.), boiling water, acid or alkaline items to clean the larder considering that this may damage the fridge surface and
interior. Boiling water and benzene may deform or damage plastic parts.
REPLACING THE LED LIGHTING
This appliance is equipped with a LED light bulb. It can be used for a long time. In case, the LED bulb is blown, you can replace it
yourself.
7
troubleshooting
Problem
Appliance is not functioning;
light does not work
Temperature inside the
larder is too high or too low
Appliance is excessively noisy
Note: gurgling and hissing noises due to expansion in the refrigerant circuit are normal.
24
•
English
Cause
Appliance is not plugged in
Thermostat has been set incorrectly
Air circulation vents are blocked
Has the appliance been installed correctly?
Are the pipes at the back touching or vibrating?
Solution
Plug the appliance in the socket
Set the thermostat correctly
Clean the ventilation openings
Check the installation
Check it and move the appliance
forwards
Advertenties
Inhoudsopgave
