When the fire basket or the cast-iron plate fins are red-hot, you are heating too
intensely.
4.6.
Low heating (for devices suitable for continuous use)
To use the device as a 'continuous fire', you can select the primary and secondary air
scoops in such a way you get the right burning speed. Always make sure there's enough
glow on the heating bottom.
4.7.
Ash removal
With the included "cold" hand, the shaking grate
can be moved and the ashtray can be removed
from the appliance (see image). The ash drawer
must be timely emptied. The ashes must not
obstruct the passage of the combustion air-flow,
and in no case should the ash touch the underside
of the grating. If not, the grating will overheat and
will be damaged. You can break any caked ashes
with the supplied "poker". For the operation
procedure, see figures.
Relatively speaking, burning wood produces little
ash and it will not be necessary to remove it each
time daily. The ash in the cavities between the ribs
of the fire plate does not need to be removed,
since wood burns better on a bed of ash.
DRU 64GM -DRU 78GM
39
03.27617.000