Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B2
B1
8
8
B2
B1
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum individual power for each zone is 3700 W.
If simultaneous cooking is taking place on zones A1 and A2 or B1
and B2, the power of 3700 W is divided between these 2 zones
A1 and A2 or B1 and B2.
Cooking zone in cm
A1
24 x 20
A2
24 x 20
B1
24 x 20
B2
24 x 20
Power limit
Selected cooking zone with Power function
Power limit activated
[9] reduced to [8] and flashes
In order to be able to make use of the maximum possible power
for 2 zones at the same time, use a combination of zone A1 or
A2 and B1 or B2.
5.3.5 Timer function
The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
for each zone.
Timer function
Setting or changing the cooking time
Select the power by gliding your finger over the
slider
Select the timer
‐
+
Press
and
on the timer at the same time
and if necessary press simultaneously again
until the hourglass of the relevant zone is
highlighted
A2 A1
8 8 8
8
8
min
A2
A1
Power (W)
Normal: 2100
Power: 3000
Super Power: 3700
Display
P
8
Display
1‐P
Reduce the time
‐
press
on the timer
Increase the time
+
press
on the timer
After a few seconds the LED no longer flashes [ min ]. The time
has been selected and the countdown has begun.
Switch off the timer function
Select the timer
‐
+
Press on
and
at the same time until the
desired hourglass lights up
Stop the timer
‐
Keep pressing
on the timer until the timer
displays
000
,
or set the power of the cooking zone to
If different timers are to be activated on multiple zones, this
operation must be repeated several times. The activated timer
lights up next to the appropriate zone.
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
Using the timer without cooking:
Timer without cooking
Switch on the hob. Press
Select the timer
‐
+
Press
and
simultaneously on the timer
Reduce the time
‐
press
on the timer
Increase the time
+
press
on the timer
After a few seconds the LED no longer flashes [min]. The time
has been selected and the countdown has begun.
Turn off automatically at the end of the cooking time:
As soon as the selected cooking time is up, the display will flash
000
, a beep will be heard, and the cooking zone will turn off.
To stop the audible signal and the flashing, press
timer.
– 70 –
060‐
059...
001‐
002...
Display
remaining
time
000
0
Display
000
060‐
059...
001‐
002...
‐
+
or
on the
Advertenties
Hoofdstukken
Inhoudsopgave
