Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.1.4 Pan detection
The cooking zone that has been switched on is only active
when a cooking pan is detected by the pan detection system.
The induction hob does not work:
– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the
symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The
on the display. The
symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use.
4.1.5 Indication of residual heat
After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
symbol disappears when the cooking zone glass can be
H
handled without danger.
WARNING: As long as the residual heat indication
remains active, the cooking zone(s) must not be
touched and no heat-sensitive items should be
placed on the cooking zone. Risk of fire and burns.
4.1.6 Power function
Power function
boosts the power to the selected cooking
P
zone. If this function is activated, these cooking zones will be
subjected to considerably higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off
Switch on power
Press the cooking zone selection button.
Press the
button and then the
until P
Switch off Power
Press on the
button
Management of maximum power:
The hob is divided into 2 separate heating groups.
symbol will flash
. The
H
Display
P
button
9‐0
A1 A2
Panorama Power 3 zones (1831)
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum power of the zone A1 is 3000W and 1850W for
zone A2
If simultaneous cooking is taking place on zones A1 and A2, the
maximum power of 3700W is divided between these 2 zones
A1 and A2.
Cooking zone
in cm
A1
24 x 20
A2
24 x 20
Power limit
Selected cooking zone with Power function
Power limit activated
[9] reduced to [8] and flashes
4.1.7 Timer function
The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
for each zone.
Setting or changing the cooking time
Press the cooking zone selection button
‐
+
Press
and
at the same time.
Select the timer
‐
+
Press
and
at the same time.
Reduce the time
‐
Press
on the timer
Increase the time
+
Press
on the timer
– 67 –
A1 A2
Panorama Power 4 zones (1841)
Power (W)
Normal: 2100
Power: 3000
Normal: 1600
Power: 1850
Timer function
.
Display
P
8
Display
1‐P
00
60‐
59...
01‐
02...
Advertenties
Hoofdstukken
Inhoudsopgave
