Inhoudsopgave
Advertenties
2.3.3. Readjusting the end limits
The end limits can be readjusted in any order.
Readjusting the upper end limit
1) Press the Up button to bring the motorised product to the end limit to
be readjusted.
2) Press the Up and Down buttons at the same time until the motorised
product moves up and down.
3) Press the Up or Down button to move the motorised product to the
new desired position.
4) To confirm the new end limit, press the my button until the motorised
product moves up and down.
Readjusting the lower end limit
1) Press the Down button to bring the motorised product to the end limit
to be readjusted.
2) Press the Up and Down buttons at the same time until the motorised
product moves up and down.
3) Press the Up or Down button to move the motorised product to the
new desired position.
4) To confirm the new end limit, press the my button until the motorised
product moves up and down.
2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION
2.4.1. Questions about the JUNIOR RU 30 RTS?
Observations
There may be some radio interferences.
The motorised
product does not
One or more batteries have been mounted backwards.
operate.
Batteries (inside battery tube) are weak.
The control point battery is weak.
The control point is not compatible.
The control point used has not been programmed into
the motor.
Copyright © 2014 Somfy SAS. All rights reserved.
3)
3)
Possible causes
Images not contractually binding
1)
2)
4)
1)
2)
4)
Solutions
Unplug the motor supply cable and reconnect the battery
tube to the motor.
Verify that batteries are all mounted in the correct
manner.
Check whether the batteries are weak and replace if
necessary.
Check whether the battery is weak and replace it if
necessary.
Check for compatibility and replace the control point if
necessary.
Use a programmed control point or program this control
point.
EN
5
Advertenties
Hoofdstukken
Inhoudsopgave
