Technical Data; Specified Conditions Of Use; Residual Risks - Gude GWS 700 HM-2 Vertaling Van De Originele Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor GWS 700 HM-2:
- Vertaling van de originele gebruiksaanwijzing (97 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Technical Data
Log Cutting Saw
Art. No
Rated voltage / Mains frequency
Rated power
Safety class
Type of protection
No-load speed
Saw blade dia. x hole dia
Saw blade thickness
Loading max.
Workpiece diameter:
Workpiece length
Weight
Noise details
Sound pressure level L
pA
Measured sound power level L
Guaranteed sound power level L
1) Measured according to EN ISO 3746: 2010, loaded, hazardousness K=4 dB (A)
The values stated are emission values and as such do not necessarily constitute values which are safe for the
workplace. Although there is a correlation between emission levels and environmental impact levels, whether
further precautions are necessary cannot be derived from this. Factors in uencing the actually present environ-
mental impact level in the workplace include the characteristics of the work area and other noise sources, i.e.
the number of machines and other neighbouring work processes. The permitted workplace values can likewise
vary from country to country. This information is intended to assist the user in estimating hazards and risks.
* The S6-40% indicates a load profile of 4 min load and 6 min idle time
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
The operating personnel must be adequately trained
in the use, adjustment and operation of the device.
Specified Conditions Of Use
The circular saw for firewood is used for cross cutting
of firewood. It is necessary to follow all technical
specifications and safety instructions.
Pieces of wood that are too short, too light or too thin
GWS 700 HM-2
01718
400 V / 50 Hz
5,2 kW, S6/40%*
F
IP 54
1420 min
700 mm x 30 mm 700 mm x 30 mm 600 mm x 30 mm
4,2 mm
50 kg
80 mm - 250 mm 80 mm - 250 mm 80 mm - 220 mm
500 - 1000 mm
106 kg
102 db (A)
111 dB(A)
WA
115 dB(A)
WA
GWS 700 ECO-2
01722
400 V / 50 Hz
5,2 kW, S6/40%*
F
IP 54
-1
-1
1420 min
3 mm
50 kg
500 - 1000 mm
106 kg
102 db (A)
111 dB(A)
115 dB(A)
to get caught by the barbs in the feed cradle must not
be processed by the machine.
The machine may only be operated by one
person.
Make sure there is nobody present in the dange-
rous area. The minimum distance is 2 m.
Residual risks
Danger of injury !
Caution: There may still be some residual risks
when operating the machine despite complying
with all applicable design regulations.
• Risk of injury to fingers and hands. Never put your
hands in the saw blade area.
• Parts of workpieces and tools fly off from damaged
tools: Wear eye protectors
• Noise emission: It is necessary to wear ear protec-
tors
• Wood dust emission: Wear a respirator
There may still be some hidden residual risks despite
ENGLISH
23
GWS 600 ECO-2
01723
400 V / 50 Hz
4 kW, S6/40%*
F
IP 54
-1
1420 min
3 mm
50 kg
500 - 1000 mm
104 kg
102 db (A)
111 dB(A)
115 dB(A)
Advertenties
Inhoudsopgave
