Advertenties
Beschikbare talen
Beschikbare talen
5
Using your refrigerator
Thermostat setting button
The interior temperature of your
refrigerator changes for the
following reasons:
• Seasonal temperatures,
• Frequent opening of the door and
leaving the door open for long
periods,
• Food put into the refrigerator
without cooling down to the room
temperature,
• The location of the refrigerator in
the room (e.g. exposing to
sunlight).
• You may adjust the varying interior
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
(MIN to MAX) indicates the cooling
degrees, max being the coldest
position.
• If the ambient temperature is
higher than 32 °C, turn the
thermostat button to maximum
position.
• If the ambient temperature is
lower than 25 °C, turn the
thermostat button to minumum
position.
MIN
Defrost
A) Fridge compartment
Fridge compartment performs full-
automatic defrosting. Water drops and
a frosting up to 7-8 mm can occur on
the inner rear wall of the fridge
compartment while your refrigerator
cools down. Such formation is normal
as a result of the cooling system.
The frost formation is defrosted by
performing automatic defrosting
with certain intervals thanks to the
automatic defrosting system of the
rear wall. User is not required to
scrape the frost or remove the water
drops. Water resulting from the
defrosting passes from the water
collection groove and flows into the
evaporator through the drain pipe and
evaporates here by itself.
Check regularly to see if the drain pipe
is clogged or not and clear it with the
stick in the hole when necessary.
1
EN
Advertenties
