Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en
Operating tips
While the refrigeration unit is running,
■
water droplets or a thin layer of ice
may form at the rear panel of
the refrigerator. This is nothing
unusual. It is not necessary to scrape
off the frost or wipe off the water
droplets. The rear panel defrosts
automatically. The condensation
collects in the condensation channel
and is carried to the refrigeration unit
where it evaporates.
If the air humidity is high,
■
condensation may form
in the refrigerator compartment,
especially on the glass shelves. If this
is the case, pack or wrap the food
and select a lower temperature
in the refrigerator compartment.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 5 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 1.
26
Energy saving mode
When the appliance is not used,
the display on the controls switches
to energy saving mode.
Energy saving mode display, Fig. "/
■
6, illuminates.
The luminosity of the temperature
■
displays is reduced.
When the "Super" function is switched
■
on, the corresponding super display is
lit (Super cooling display, Fig. "/2).
As soon as you operate the appliance,
e.g. open door or press any button,
the display switches to normal
illumination.
Alarm function
Door opening alarm
The door alarm (continuous sound)
switches on and the Alarm "/4 display
is lit if the appliance is left open for too
long. Close the appliance to switch off
the door alarm.
Switching off the alarm
Fig. "
Press the alarm button 4 to switch off
the warning signal.
Usable capacity
Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. 1
Advertenties
Inhoudsopgave
