Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Always secure the vehicle against
rolling away as follows:
- Apply wedges for wheels.
- Put the vehicle in gear ("P" on an
automatic gearbox).
- Put the hand-brake on.
4. The legs of the axle stands must be completely
unfolded.
5. Check that the holding bolt is correctly seated
(it must protrude from the other side of the
middle pole). Secure the holding bolt against
slipping out with the safety pin.
6. Check that the support positions provided by
the manufacturer are in perfect working order.
7. Position the axle stands under the vehicle at
the points provided, or at a position that is very
close to the indicated point (see the vehicle
manual).
8. Lower the vehicle slowly and carefully onto the
axle stands. The axle stands must be secured
and level.
9. After using the axle stands: When removing
the holding bolt, hold onto the middle pole so
that this does not fall down through the middle
hole.
˜ Maintenance and checking
Before each use, check the axle stands and the
welds. Never use damaged axle stands.
There are no spare parts available for this
product. In case the product is damaged or
broken, discard the product.
The holding bolt and holding mechanism must
be in perfect working order.
WARNING! Risk of injury! Never use
m
the axle stands or its parts for any
other use except that described by
the manufacturer. The manufacturer
accepts no responsibility for incorrect
use of the axle stands!
˜ Cleaning and care
For cleaning and care, use only a slightly damp,
fluff-free cloth.
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
GB/IE
9
Advertenties
Inhoudsopgave
