Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
m
DANGER! Never exceed the maximum
load for each pair of axle stands
(2000 kg per axle stand). Excess
load may damage the axle stands
or destroy them completely. Always
position the load in the middle of the
ramp! Unless you are lifting the car,
always use the axle stands 2 at a
time on a level surface which is able
to take the weight. Using the axle
stands on a surface which cannot
take the weight may lead to uneven
weight distribution and possible
complete loss of load-bearing
capacity. Do not use on gravel. Non-
observance of these instructions may
cause damage of the axle stands, loss
of the load and therefore to property
damage, severe personal injury or a
fatal accident.
Use this product only with the components
described in the instructions and use it only for
the intended use.
Support the raised weight immediately with the
axle stands.
˜ Scope of delivery
x 2
8
GB/IE
˜ Assembly instructions
1
˜ Using the axle stands
1. Familiarise yourself with the function and
components such as the folding mechanism
and adjustable legs. Check that the axle stands
are in perfect working order.
2. Install the middle pole inside the middle tube
x 2
at the required height and secure it with the
holding bolt.
Note: During use, always push the pin through
the support and insertion pipes.
2
4
3
Advertenties
Inhoudsopgave
