AXLE STANDS
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Only use the product as instructed and only
for the indicated field of application. Keep these
instructions in a safe place. If you pass the product
on to anyone else, please ensure that you also pass
on all the documentation with it.
Instructions
Please read the instructions carefully and follow
the safety advice. To avoid personal and property
damage, use the product carefully and only for
the intended use. Damage caused by incorrect
handling or non-observance of the instructions is
not covered by the warranty.
IMPORTANT! RETAIN INSTRUCTIONS FOR
FUTURE REFERENCE.
Intended use
Only for private use – jacking up a car for tyre
changes.
Technical specifications
Model number:
HG03066
Max. load:
2000 kg (per axle stand)
Hub height I:
24 cm
Hub height II:
26.7 cm
Hub height III:
29.5 cm
Hub height IV:
32.2 cm
Hub height V:
35 cm
Hub height VI:
37.7 cm
Safety instructions
Always check that the axle stands are in
perfect working order. Never use damaged
axle stands.
Use the axle stands only on a level,
stable surface.
When jacking up a car, always use
both axle stands. Never use single
axle stand when changing tyres.
Before first use: Familiarise yourself with the
axle stands and the folding mechanism.
m
WARNING! Risk of injury! Ensure that
the holding bolt and the safety pin are seated
correctly. Otherwise, the middle pole might fall
freely through the middle tube.
m
WARNING! Always let the vehicle off
the axle stands slowly and carefully.
Before beginning work on the vehicle, ensure
that the axle stands and vehicle are stable.
Always use 2 axle stands for a vehicle, never
more than 2.
Never use the jack on a vehicle that is already
on the axle stands.
Never use the axles stands for 3-wheeled
vehicles or for trailers.
GB/IE
7